High-quality passage lever lock designed for smooth, non-locking access. Ideal for residential and commercial applications where a secure yet non-locking mechanism is required.

“Premium Rim Cylinders are Re-keyable to original manufacturers systems. Commonly used in Exit and Panic devices.
Body
Brass, 1-5/32″” (29.37 mm) diameter
Cylinder 5-Pin Keyed, Pre-Drilled to Accept 6-Pin
Schlage SC1
Keys Includes 2 Brass Keys
Stem Adjustable Tailpiece
Furnished With back plate, 2 Screws (2″” door max.), tailpiece and cylinder ring
Finish 10B
Keying Keyed Alike Up To 5 – KA 5
Warranty Limited Lifetime Mechanical Warranty””

“The 4560 Series Deadlatch Handles easily unlock the 4300, 4500, and 4900 Series Deadlatches. These handles fit solidly into the cylinder hole of Adams Rite deadlatches.

Designed to operate 4300, 4500, and 4900 Series Deadlatches by a natural downward hand movement, these handles incorporate an activator cam disc that mounts on the handles’ escutcheon and fits solidly into the cylinder hole of the latch. Not intended for use as a door pull.

ADA Compliant Handle of cast aluminum. ADA compliant lever is shaped to fit the hand, with a concave thumb-rest portion that tends to keep knuckles and thumb safely away from the jamb, even on a short backset narrow stile.
Handle Type Lever
Door Thickness 1-3/4″” to 2″”
Escutcheons A 1/4″” [6.4 mm] square heat-treated spindle is part of escutcheon assembly, which interlocks with the cam plug. Finished to match lever.
4560, 4565 use the same sloping 1-3/8″” x 4″” [34.9 mm x 101.6 mm] escutcheon, designed to match the clean lines of a narrow stile door.
Cam Plug
Secured in latch body by cylinder set screw, the plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, reversing the cam, and replacing the clip.

Handing
Configured for LH/LHR but is easily reconfigured in the field to accommodate either door swing.
Finish 130 Aluminum”

“Ilco branded zinc die cast cylinders are used primarily for storefront lock
and exit device applications. This cylinder is designed as an inexpensive
option when brass quality and longevity is not a requirement.

Mortise Zinc Die Cast Cylinders

1″” (25.4 mm)
Adams Rite
Available 5 pin only
Thread Size is 1 5/32″” (29.36 mm)
Dark Bronze
Stamped Trim Ring included”