“PN: S6188
For use with model numbers: DL1200, DL1300, PDL1300
Includes: 1LH and 1RH”

“Can retrofit Schlage L9000 Series mortise lock without drilling any additional holes on the door for sectional and escutcheon trims
Fully reversible design
No exposed mounting screws on the outside and inside trims
The outside lever has a Clutch (Free-Wheeling design). The lever rotates when the lever is locked preventing excessive force from being applied to the horizontal lever. The design decreases the chance of the lever being broken or damaged
Lock body conforms to all dimensional and operational performances of ANSI A156.13, Grade 1, exceeds 1,000,000 cycles Function: F07 – Storeroom
Door Thickness: 1-3/4” (44.5mm) standard
Handing: Field Reversible
Backset: 2-3/4″” (70mm)
Strike: Brass or stainless steal strike: ANSI Standard A115.1; curve lio with dust box
Lock Case: Heavy Duty wrought steel, zinc dichromate plate
Center to Center: Center of the lever to center of the cylinder is 3-7/8” (98mm)
Faceplate: Brass or stainless steel; 8” x 1 7/32” (203mm x 31.3mm); ANSI Standard A115.1
Deadbolt: 1” (25.4mm) throw; hardened stainless steel
Latch Bolt:
3/4” (19mm) throw; one-piece stainless steel with anti-friction reversible tongue
Cylinder: 6-pin solid brass “C” keyway
Trims: Sectional Trim, SS Lever
Toggle Button: High rust-resistant chrome plated zinc alloy
Auxiliary Latch: Stainless Steel, non-handed
Finishes: 26D Satin Chrome
Fire Rated: 3-hour fire door
Certifications: ANSI / BHMA A156.13 Grade 1. Meets ADA, UL/cUL Listed”

“The Schlage L Series has long been the benchmark for mortise locks.
Beyond strength and security – it offers tremendous flexibility to allow it to meet the needs of almost every application Lock Function
ANSI F04 Entry/Office lock – Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumb turn

Handing Right Hand
Door Thickness 1 3/4″” (44 mm)
Cylinder No Cylinder – Lock Body Only
Backset 2 3/4″” (70 mm) only
Bolt 1″” (25 mm) throw stainless steel deadbolt
Latch
3/4″” (19 mm) throw stainless steel latch with anti-friction tongue
Material Stainless Steel / Zinc
Case size 4 7/16″” x 3 5/8″” x 1″” (113 mm x 92 mm x 25 mm)
Spacing Knob or lever to cylinder: 3 7/8″” (98 mm); knob or lever to thumbturn hub: 2 11/16″” (68 mm)
Strike 1 1/8″” x 3 1/2″” (29 mm x 89 mm) with dust box
Certifications
ANSI/BHMI Certified A156.13-2012
Commercial Grade 1
Lock Body Mortises Inside the Edge of the Door
UL Listed for 3 Hour Fide Door
Manufacturer Warranty Limited lifetime mechanical warranty”