--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
--- FREE Shipping Over $200 ---
“The 4560 Series Deadlatch Handles easily unlock the 4300, 4500, and 4900 Series Deadlatches. These handles fit solidly into the cylinder hole of Adams Rite deadlatches.
Designed to operate 4300, 4500, and 4900 Series Deadlatches by a natural downward hand movement, these handles incorporate an activator cam disc that mounts on the handles’ escutcheon and fits solidly into the cylinder hole of the latch. Not intended for use as a door pull.
ADA Compliant Handle of cast aluminum. ADA compliant lever is shaped to fit the hand, with a concave thumb-rest portion that tends to keep knuckles and thumb safely away from the jamb, even on a short backset narrow stile.
Handle Type Lever
Door Thickness 1-3/4″” to 2″”
Escutcheons A 1/4″” [6.4 mm] square heat-treated spindle is part of escutcheon assembly, which interlocks with the cam plug. Finished to match lever.
4560, 4565 use the same sloping 1-3/8″” x 4″” [34.9 mm x 101.6 mm] escutcheon, designed to match the clean lines of a narrow stile door.
Cam Plug
Secured in latch body by cylinder set screw, the plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, reversing the cam, and replacing the clip.
Handing
Configured for LH/LHR but is easily reconfigured in the field to accommodate either door swing.
Finish 130 Aluminum”
$48.00 $43.20
“The 8800 Series Narrow Stile Rim Exit Device is designed for
narrow stile aluminum applications that require a life-safety exit
device with Starwheel interlocking solution. Designed for use in
applications with single doors or pairs of doors with a mullion.
More Details Below
Certifications UL 305 Panic Hardware
ANSI/BHMA A156.3-2008 Grade 1
ANSI/BHMA A156.3-2014 Grade 2
Materials Push bar made of extruded aluminum,
clad or anodized in a variety of finishes
Handing Device is non-handed.
Push bar Length
Standard size: 36″” [914.4 mm] Standard width bars can be field cut to the next smallest opening width.
Door Thickness Suits 1-3/4″” [44.5 mm] standard, up to 2-1/4″” [57.2 mm].
Stile Width Minimum 2″” [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors
Projection 2-5/8″” [66.7 mm] when fully projected,
1-5/8″” [41.3 mm] when dogged.
Dogging Standard dogging with hex key or optional cylinder dogging.
Fasteners Standard machine screws.
Cylinders Fits any standard 1-5/32″” [29.4 mm] diameter rim cylinder
Strike Standard strike and narrow
versions for centering doors in 4″”
jamb (both strikes included).”
$385.00 $308.00
“The 8800 Series Narrow Stile Rim Exit Device is designed for
narrow stile aluminum applications that require a life-safety exit
device with Starwheel interlocking solution. Designed for use in
applications with single doors or pairs of doors with a mullion.
More Details Below Certifications UL 305 Panic Hardware
ANSI/BHMA A156.3-2008 Grade 1
ANSI/BHMA A156.3-2014 Grade 2
Materials Push bar made of extruded aluminum,
clad or anodized in a variety of finishes
Handing Device is non-handed.
Push bar Length
Standard size: 36″” [914.4 mm] Standard width bars can be field cut to the next smallest opening width.
Door Thickness Suits 1-3/4″” [44.5 mm] standard, up to 2-1/4″” [57.2 mm].
Stile Width Minimum 2″” [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors
Projection 2-5/8″” [66.7 mm] when fully projected,
1-5/8″” [41.3 mm] when dogged.
Dogging Standard dogging with hex key or optional cylinder dogging.
Fasteners Standard machine screws.
Cylinders Fits any standard 1-5/32″” [29.4 mm] diameter rim cylinder
Strike Standard strike and narrow
versions for centering doors in 4″”
jamb (both strikes included).”
$377.00 $301.60
“Sirenlock Model 250 is a UL Listed panic alarm deadbolt devices that restrict unauthorized use of exit doors by sounding an alarm while providing instant egress in emergencies SPECIFICATIONS:
FUNCTION Weather-Resistant Alarmed Panic Lock
COVER
Die-Cast Metal
PUSH BAR
Extruded Aluminum channel and push bar
LENGTH Paddle
HANDING Non-handed
INSTALLATION
Surface-mounted for single or double doors
CYLINDER Accepts most standard size rim cylinders for inside And outside key control (not included)
POWER Uses 1 9v battery (included). Normal battery life 1 Year. Can be powered by AC power by using either PP100 or AC9.
LOCK BOLT 1� throw heavy die-cast with reinforced
Steel inserts.
ALARM
Dual piezo siren measured at 95db”
$385.00 $308.00
“PN: S6188
For use with model numbers: DL1200, DL1300, PDL1300
Includes: 1LH and 1RH”
$24.00
“Mortise Lock comes with (6040) ASA Strike as standard. Latch bolt by knob from either side, except when outside knob is locked by stop in front, then latch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and deadbolt. 1 in. throw Deadbolt with saw-proof inserts is standard equipment. Not available for 2 in. or smaller backsets. When extended, Deadbolt deadlocks latch bolt.
Features
Baldwin Estate 6020 (2.75″” backset)
Latch bolt by thumb piece outside and knob/lever inside, except when thumb-piece is locked by stop in front; then latch bolt by key outside and knob/lever inside
Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and deadbolt.
1″” (25mm) throw deadbolt with saw-proof inserts is standard equipment.
Sold with Strike Plate and Face plate
When extended, deadbolt deadlocks latch bolt
For use with single and double cylinder applications”
$369.00
“Latch bolt by thumb piece outside and knob inside, except when thumb piece is locked by stop in front; then latch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside. When Deadbolt is thrown, stop is automatically activated making outside thumb piece rigid. Inside knob retracts latch and Deadbolt simultaneously but DOES NOT free outside thumb piece. When extended, Deadbolt deadlocks latch bolt. Sold with faceplate and strike.
Features
Baldwin Estate 6021 (2.75″” backset)
Residential Entrance mortise lock with Emergency Egress
Latch bolt by thumb piece outside and knob/lever inside, except when thumb-piece is locked by stop in front; then latch bolt by key outside and knob/lever inside
Deadbolt by key outside and turn piece inside. When deadbolt is thrown, stop is automatically activated making outside thumb piece rigid. Inside knob/lever retracts latch and Deadbolt simultaneously but DOES NOT free outside thumb piece
1″” (25mm) throw deadbolt with saw-proof inserts is standard equipment.
Sold with Strike Plate and Face plate
When extended, deadbolt deadlocks latch bolt
Not recommended for Double Cylinder Applications”
$369.00
“Mortise Lock comes with (6340) ASA Strike as standard. Latch bolt by knob from either side, except when outside knob is locked by stop in front, then latch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and deadbolt. 1 in. throw Deadbolt with saw-proof inserts is standard equipment. Not available for 2 in. or smaller backsets. When extended, Deadbolt deadlocks latch bolt (except for 6830/6832)
Features
Baldwin Estate 6320 (2.5″” backset)
Residential Entrance mortise lock
Latch bolt by thumb piece outside and knob/lever inside, except when thumb-piece is locked by stop in front; then latch bolt by key outside and knob/lever inside
Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and deadbolt.
1″” (25mm) throw deadbolt with saw-proof inserts is standard equipment.
Sold with Strike Plate and Face plate
When extended, deadbolt deadlocks latch bolt
For use with single and double cylinder applications”
$369.00
“The deadbolt automatically extends when the door closes. Both the deadbolt and latchbolt retract simultaneously when the lock is opened from either side.
Features:
Backset: 2-3/4″” (70mm)
Lock Function: Automatic
Handle Design: L/L
Finish: US32D
Hand: RH”
$169.00
“FCH-3792
Packaging powerful security into a compact size, the First Choice 3792 can be mounted on doors with stiles as narrow as 2” and includes a 1” forged steel latch bolt. Non-handed and available for doors up to 4 feet, the 3790 is a convenient solution for demanding, busy traffic conditions.
These durable devices are ANSI Grade I (500,000 cycles) and UL Listed. Striking anodized finishes are accented with high performance coatings on solid metal end clips.
Key Cylinder Preparation Include Cylinder Prep. Kit /without Key Cylinder
Application Narrow Stile Application
Bolt 1” Steel Latch Bolt with 1/2” Throw
Device lengths 36″”, 42″”, 48″”
Door Width 36″”, 42″”, 48″”
Hand non-handed
Limited Manufacturer Warranty 2 Years
Fire Rated No
Dimensions 2 1/2” Push Bar Height
41 5/16” Centerline Height Typical
Center Case Cover – 6 5/8” Tall by 1 1/4” Wide
Certifications ANSI A156.3 – 2008 Grade “
$485.00 $388.00
“Since Hager’s inception in 1849 their Hager brand commercial hinges have always been made right here in America. And it’s not just hinges. The bulk of Hager’s traditional door hardware lines are American-made.
“
$499.00 $399.20
“Since Hager’s inception in 1849 their Hager brand commercial hinges have always been made right here in America. And it’s not just hinges. The bulk of Hager’s traditional door hardware lines are American-made.
“
$499.00 $399.20
“Since Hager’s inception in 1849 their Hager brand commercial hinges have always been made right here in America. And it’s not just hinges. The bulk of Hager’s traditional door hardware lines are American-made.
“
$379.00 $303.20
“Since Hager’s inception in 1849 their Hager brand commercial hinges have always been made right here in America. And it’s not just hinges. The bulk of Hager’s traditional door hardware lines are American-made.
Specs
Cylinders/Cores
Requires the use of a Rim cylinder, 3901, sold separately
Escutcheons
3″” x 11″” (76 mm x 298.5 mm)
Functions
03 – Key retracts latchbolt
Notes
Supplied with retaining cup for use with 161 door prep
Projection
1-3/4″” (44.5 mm)
Pull CTC
5-1/2″” (140 mm)
Warranty
Five-years”
$175.00 $140.00
“Since Hager’s inception in 1849 their Hager brand commercial hinges have always been made right here in America. And it’s not just hinges. The bulk of Hager’s traditional door hardware lines are American-made.
Specs
Cylinders/Cores
Requires the use of a Rim cylinder, 3901, sold separately
Functions
03 – Key retracts latches
Notes
Cylinder cup included with trim for retrofitting doors prepped for bored locks (ANSI A115.2)
Retaining cup, 2-649-0137, included for 161 door prep
Projection
1″” (25 mm)
Warranty
Five-years”
$80.00 $64.00
“LK-2950-DC
This is a Lockey 2950-DC Mechanical Keyless Narrow Stile Hook Bolt Lock with Double Combination.
Features
Keypad on both sides
Mechanical, keyless, narrow stile hook bolt lock
One user code with thousands of possible combinations
Replaces Adams-Rite style lock
Knob on exterior
Changeable handing
1 1/8” backset
Ideal for sliding gates & aluminum storefront doors DIMENSIONS 5 5/8” L x 1 5/8” W x 1 5/8” D
FINISHES AVAILABLE Antique Brass, Bright Brass, Bright Chrome, Jet Black, Marine Grade, Oil Rubbed Bronze, Satin Chrome, Satin Nickel, White
DOOR THICKNESS 1 3/16” to 2”, up to 5” with Extension Kit (Sold Separately)
BACKSET 1 1/8″”
TOTAL COVERAGE WITH TRIM PLATES 6” L x 2” W
THROW
1 1/2”
MATERIAL Five-ply laminated steel bolt
Concealed hardened steel pin for maximum security
APPLICATION Exterior & Interior Use
Weather Resistant
WARRANTY Lifetime Mechanical
Compatible With (Sold Separately)
GB950 Gate Box
GB2900 LINX Gate Box for Chain Link
Key Override System
Extension Kit
Narrow Stile Mounting Tabs”
$429.00 $386.10
